March 9-11 :: TEST FOR KNOWLEDGE :: CAR!!
Expectations:
C: Voice Level 2 (only the people next to you can hear you and no shouting across the room)
H: Ask your team, elbow partner or raise hand
A: Work on the assignment
M: Stay in your assigned seat
P: Work till assignment is completed
S: Finishing your work
PLEASE SIT IN YOUR ASSIGNED SEAT! NO EXCEPTIONS!
Typing.com ASSIGNMENT!
Intermediate: Short Paragraphs :: Due FRIDAY, March 11 :: 10 Points
Typing:
1. Log in to typing.com
2. Click Lessons
3. On Intermediate Tab, Click Short Paragraphs (this is due FRIDAY, March 11): 10 Pts.
4. Begin Typing (Please DO NOT GO PAST THIS LESSON! It will RESET if you do!)
NOTE!!! No late TYPING will be accepted!!!!
If you are finished or waiting, work on Clever!
Students click on the Clever icon on the desktop
Sign in using the username & password (same as logging into computer)
Click on the square that says iReady
Continue until time is up!
Lessons have been assigned to them based on their diagnostic test results both in Math and Reading. Within each lesson are brain break games. The district is pushing a goal of 45 minutes per week on Online Lessons in ELA and 45 minutes per week in Math to close the gaps found in the diagnostic. Math and ELA are providing some of that time during the week, but not all.
TINKERCAD!
What you NEED to know!!!!
WHAT ARE WE LEARNING: TinkerCAD, an easy-to-use 3D CAD design tool...LESSONS!
WHY IS IT IMPORTANT: Gives the user the ability to take something that's 3D and represent it in 2D. It is essential to all industries that use 3D modeling like architects, engineers and game designers! Lessons help you learn important skills in just a few steps - so you can master 3D design in no time.
HOW WILL MY TEACHER KNOW WHAT I LEARNED: You will complete lessons on TinkerCAD and upload files you have completed through TEAMS!
Log in to our class on TinkerCad!
Your username has been made for you!
Click PERIOD BUTTON (below) to log in to YOUR class period to TinkerCAD
Select Join with NICKNAME
Your "Nickname" is your FIRST NAME and LAST NAME and YOUR PERIOD NUMBER
EXAMPLE:
Your "nickname" has been created for you!
TODAY WILL BE A TEST OF WHAT YOU NOW KNOW!
You may ask your elbow partner for help, BUT they cannot do it for you!
The car is DUE on March 11, 2022!
SEPARATE YOUR BROWSER TABS TO VIEW SCREENS AT THE SAME TIME!
CLICK ONE TAB AND PULL IT AWAY FROM THE OTHER...
SELECT ONE TAB AND PRESS WINDOWS + LEFT ARROW
SELECT THE OTHER TAB AND PRESS WINDOWS + RIGHT ARROW
TABS SHOULD NOW BE SIDE BY SIDE!
THE ASSIGNMENT!
Follow the instructions below!
You may ask your elbow partner for help, BUT they cannot do it for you!
The car is DUE on March 11, 2022!
REMEMBER THIS IS A TEST OF WHAT YOU KNOW!
CAR!
Today we will create this from scratch!
1
CLICK CREATE NEW DESIGN
2
On the top left corner, click the name to change it to CAR
3
TIP! (before you begin!)
Leave your Snap Grid at1.0 mm!
4
Next...
Bring a Red Box on to the workplane
Change the dimensions to 100mm wide x 50mm long
Change the height to 5mm
5
Round Roof...
Bring a Round Roof on to the workplane
Change the dimensions to 40mm wide x 50mm long
Change the height to 15mm
6
Align...
Draw an imaginary box around the Red Box and Round Roof
Click the alignment tool on the top right corner
Click the dot on the bottom LEFT and the left center to align!
7
Next
Deselect by clicking the blue workplane area
SELECT (click) the Round Roof shape ONLY
Move the Round Roof shape 5 spaces to the LEFT by using the LEFT arrow key on your keyboard (press it 5 times!)
8
Group...
Draw an imaginary box around BOTH shapes
Group them!
9
Another Round Roof...
Bring a Round Roof on to the workplane
Change the dimensions to 40mm wide x 50mm long
Change the height to 15mm
10
Align...
Draw an imaginary box around ALL
Click the alignment tool on the top right corner
Click the dot on the bottom right and the left center to align!
11
Next
Deselect by clicking the blue workplane area
SELECT (click) the Round Roof shape ONLY
Move the Round Roof shape 5 spaces to the RIGHT by using the RIGHT arrow key on your keyboard (press it 5 times!)
12
Group...
Draw an imaginary box around BOTH shapes
Group them!
13
Next...
Bring a Red Box on to the workplane
Change the dimensions to 70mm wide x 50mm long
Change the height to 10mm
14
Raise the box...
Click and pull the cone/triangle up
Enter 5 in the box (5 mm above the workplane)
15
Align...
Draw an imaginary box around ALL
Click the alignment tool on the top right corner
Click the dot on the bottom CENTER and the left CENTER to align!
16
Group...
Draw an imaginary box around BOTH shapes
Group them!
17
Another Round Roof...
Bring a Round Roof on to the workplane
Change the dimensions to 50mm wide x 50mm long
Change the height to 15mm
18
Raise this Round Roof...
Click and pull the cone/triangle up
Enter 15 in the box (15 mm above the workplane)
19
Align...
Draw an imaginary box around ALL
Click the alignment tool on the top right corner
Click the dot on the bottom CENTER and the left CENTER to align!
20
Next
Deselect by clicking the blue workplane area
SELECT (click) the Round Roof shape ONLY
Move the Round Roof shape 5 spaces to the RIGHT by using the RIGHT arrow key on your keyboard (press it 5 times!)
21
Group...
Draw an imaginary box around BOTH shapes
Group them!
22
Add a Roof shape...
Bring a Roof (green) on to the workplane
Change the dimensions to 50mm wide x 50mm long
Change the height to 13mm
23
Raise the Roof...
Click and pull the cone/triangle up
Enter 15 in the box (15 mm above the workplane)
24
Align...
Draw an imaginary box around ALL
Click the alignment tool on the top right corner
Click the dot on the bottom CENTER and the left CENTER to align!
25
Next
Deselect by clicking the blue workplane area
SELECT (click) the Green Roof shape ONLY
Move the Roof shape 7 mm to the LEFT by using the LEFT arrow key on your keyboard (press it 7 times!)
26
Group...
Draw an imaginary box around BOTH shapes
Group them!
27
Add another Roof shape...
Bring a Roof (green) on to the workplane
Change the dimensions to20mm wide x 50mm long
Change the height to 9mm
28
Raise the Roof...
Click and pull the cone/triangle up
Enter 15 in the box (15 mm above the workplane)
29
Align...
Draw an imaginary box around ALL
Click the alignment tool on the top right corner
Click the dot on the bottom RIGHT and the left CENTER to align!
30
Next
Deselect by clicking the blue workplane area
SELECT (click) the Green Roof shape ONLY
Move the Roof shape 20 spaces to the LEFT by using the LEFT arrow key on your keyboard (press it 20 times!)
31
Group...
Draw an imaginary box around ALL shapes
Group them!
32
Add another Round Roof shape...
Bring a Round Roof shape on to the workplane
Change the dimensions to40mm wide x 60mm long
Change the height to 12mm
33
Raise the Round Roof...
Click and pull the cone/triangle up
Enter 15 in the box (15 mm above the workplane)
34
Make it a HOLE..
Select HOLE
35
Align...
Draw an imaginary box around ALL
Click the alignment tool on the top right corner
Click the dot on the bottom CENTER and the left CENTER to align!
36
Next
Deselect by clicking the blue workplane area
SELECT (click) the Round Roof Hole shape ONLY
Move the Roof shape 5 mm to the RIGHT by using the RIGHT arrow key on your keyboard (press it 5 times!)
37
Group...
Draw an imaginary box around ALL shapes
Group them!
38
Raise the Car...
Click and pull the cone/triangle up
Enter 10 in the box (10 mm above the workplane)
39
Change the Car Color...
Click on the Solid color in the dialog box
Select a new color!
40
Wheels
Bring a Cylinder on to the workplane
Change (check) the diameter to 20 mm (20 in both boxes)
Change the height to 3 mm
41
Rotate the workplane view
Using your mouse, RIGHT click and pull to the left to view the car like shown (left)
42
Rotate the Wheel (cylinder)...
Click on the rounded, double arrow on the left and enter 90 in the box
This will rotate the "wheel" 90
43
Bring the wheel up on the workplane...
Press 'D' on your keyboard to bring the wheel UP on the workplane
44
Change the wheel color to black...
Click on the Solid color in the dialog box
Select BLACK!
45
Align...
Draw an imaginary box around ALL
Click the alignment tool on the top right corner
Click the dot on the bottom CENTER and the left BOTTOM to align!
46
Next
Deselect by clicking the blue workplane area
SELECT (click) the Wheel (black cylinder) shape ONLY
Move the Wheel shape 1 mm to the DOWN by using the DOWN arrow key on your keyboard (press it 1 time!)
47
Duplicate the wheel...
SELECT (click) the Wheel (black cylinder) shape ONLY
Select CTRL + D on your keyboard
This will make an exact copy of the wheel on top of the other wheel
48
Move the duplicated wheel...
With the Wheel (black cylinder) shape selected still ...
Move the Wheel shape 30 mm to the LEFT by using the LEFT arrow key on your keyboard (press it 30 times!)
49
Move the original wheel...
Select the original Wheel (black cylinder) shape
Move the Wheel shape 30 mm to the RIGHT by using the RIGHT arrow key on your keyboard (press it 30 times!)
50
Group the wheels...
With the original wheel still selected...
Hold down the shift key and select the other wheel
Group them!
51
Rotate the workplane view
Using your mouse, RIGHT click and pull to the RIGHT to view the car like shown (left)
52
Duplicate the grouped wheels...
SELECT (click) the grouped Wheels (black cylinder)
Select CTRL + D on your keyboard
This will make an exact copy of the wheels on top of the other wheels
53
Move the wheels using the arrow keys...
With the duplicated wheels selected...
Move the Wheel shape 49 mm to the RIGHT by using the RIGHT arrow key on your keyboard (press it 49 times!)
54
Rotate the workplane view
Using your mouse, RIGHT click and pull to the RIGHT to view the car like shown (left)
55
Group...
Draw an imaginary box around ALL
Group them!
Click on the Solid color in the dialog box
Change to MultiColor...
Click on the Solid color in the dialog box
Click the MULTICOLOR box to retain the car color and wheel color!
BEFORE YOU DOWNLOAD...
The car MUST be DIFFERENT color than the wheels!
Make sure you have followed instructions!
ALSO FILE MUST BE NAMED Car!
REMEMBER to add your NAME to the workplane!
Drag the TEXT shape onto your workplane
Use the Text Dialog box to enter your first name!
GETTING CREDIT!
ONCE COMPLETED!
Click the HOME BUTTON to view your entire workplane
Click SEND TO (on the TOP RIGHT!)
Click the DOWNLOAD BUTTON!
This will download your Workplane and all created upon it to your DOWNLOADS folder!
Go to our Classroom in TEAMS
Select Assignments
Select
TinkerCAD: Car!
Scroll down to MY WORK
Click +ATTACH
Click UPLOAD FROM THIS DEVICE
Select DOWNLOADS (on the left)
Find the downloaded file and select it (it should be called Car.png)
Click OPEN
Wait for file to upload!
File will show up below under My Work
CLICK TURN IN!
NOTE: There MUST be a file (download of project) attached to get credit. Simply clicking TURN IN will not do!!!