Pull the Workplane tool (located on the Top right Corner) and drag it to the BACK end of the cylinder until you see the Orange Workplane box (see left). Then let go of your mouse to set the workplane

Remember if it is in the wrong place simply click the undo button (top left curved arrow) or press ctrl + z

From our shapes box, add a TUBE to the workplane

With the TUBE selected, click the bottom right WHITE HANDLE

Enter 8 in each of dimension dialog boxes

Click ENTER on the keyboard

(this will make the diameter of the TUBE 8mm dia.)

Select the TUBE

In the inspection dialog box click the solid color and change to BLACK or DARK GRAY

Select ALL (ctrl + A) or draw an imaginary box around all objects

Click the ALIGN tool (on the top right corner...it looks like a line with 2 boxes)

Click the dot in the CENTER near the TOP of the jet

Select the Tube

Click the WHITE HANDLE in the CENTER of the tube to display the dimension dialog box.

Enter 4 in the dimension dialog box and click ENTER on your keyboard

(this will make the TUBE 4 mm thick)

Add a CONE to the workplane

With the cone selected, click the bottom right WHITE HANDLE

Enter 7 in each of dimension dialog boxes

Click ENTER on the keyboard

(this will make the diameter of the cone 8mm dia.)

Select the cone

In the inspection dialog box, click the solid color and change to ORANGE

Click the workplane tool and drag it to any white space to reset

Select ALL (ctrl + A) or draw an imaginary box around all objects

Click the ALIGN tool (on the top right corner...it looks like a line with 2 boxes)

Click the dot in the CENTER near the BOTTOM/BACK of the jet

Select Cone

Click the Black Triangle

In the dimension dialog box on the bottom right (this indicates the height from the workplane), enter 1.

Click ENTER on the keyboard

Cone should be centered in the TUBE

Select the TUBE

In the inspection dialog box, change the BEVEL dimension to 5

Click ENTER on the keyboard

Select ALL (ctrl + A) or draw an imaginary box around all objects

Click the GROUP button (on the Top right, it looks like a square and circle combined)

With everything grouped and selected, click the solid button in the inspection dialog box.

Make sure MULTICOLOR is selected

To deselect an object of group, simply click anywhere on the workplane

Add a HALF SPHERE to the workplane

With the half sphere selected, click the BLACK HANDLE on the right side (NOT THE CORNER)

Enter 9

Click ENTER on the keyboard

With the half sphere selected, click the WHITE HANDLE on the TOP/CENTER of the half sphere

Enter 4

Click ENTER on the keyboard

Select the half sphere

In the inspection dialog box, click the solid color and change to GRAY

Click TRANSPARENT

Click ENTER on the keyboard

Select ALL (ctrl + A) or draw an imaginary box around all objects

Click the ALIGN tool (on the top right corner...it looks like a line with 2 boxes)

Click the dot in the CENTER near the BOTTOM/FRONT of the jet

Deselect the objects by simply click anywhere on the workplane

Select the half sphere

Pull up on the Black Cone/ Triangle

In the dimension dialog box on the bottom right (this indicates the height from the workplane), enter 8.

Click ENTER on the keyboard

Half sphere should be partially on top of the jet

Select the TEXT tool

In the inspection dialog box, click the TEXT box and type your first name

Deselect by simply click anywhere on the workplane

If you need more help...Scroll down to the VIDEO BELOW!